Ny firmware till Sony A1 & A9 III – med över 30 förbättringar

I samband med Sonys uppdatering kring utvecklandet av certifieringen C2PA som ger bekräftar bilders äkthet både i fotoögonblicket och genom 3D-information från bilden – passade Sony även på att flagga för de nu släppta nya firmwareuppdateringarna till Sony A1 (läs testet här) och Sony A9 III (läs testet här).

Sony A1 uppdateras till version 2.01 och får bland annat stöd för bildstabilisering tillsammans med kamerahuset i koordination med objektiv. Dessutom läggs support för tidigare nämnda CP2A-certifiering till.

Sony A9 III uppdateras till version 2.00 och får även den stöd för tidigare nämnda CP2A-certifiering och möjlighet till slutare upp till 1/80 000 s i alla fotograferingslägen, något som tidigare var begränsat.

Sony A1 firmware v2.01 hittar du här.

Sony A9 III firmware v2.00 hittar du här.

Här är alla förbättringar:

Kamera & Bild testar

sony kameror tester sony a1

TEST: Sony A1 – vinnande prestanda och extrem snabbhet

Sony A1 firmware update ver. 2.01
Shooting & playback functions:

• Adds support for the Relay Playback function
• Adds support for Breathing Compensation. Note: For compatible lens information, please refer to this support page.
• Adds the Sync Release function that releases the shutters of multiple sub-cameras in conjunction with the main camera’s shutter timing. Note: Remote Camera Tool Ver. 4.1.00 is required to activate this function.
• Adds a function that displays the focus frame on the Remote Camera Tool screen when the monitor and viewfinder are turned off. Note: Remote Camera Tool Ver. 4.1.00 is required to activate this function.
• Adds support for Image Stabilization with Body-Lens Coordinated control. For compatible lens information, please refer to this support page.
• Adds a function that allows you to narrow down the images to be played back using multiple filtering conditions, such as FTP transfer status
• The maximum number of images that can be recorded in one folder has been increased to 9,999
• Allows Timecode input with the Multi/Micro USB Terminal. You can set the timecode with the source equipment. Note: A dedicated adapter cable, which is sold separately, is required to connect to the timecode source equipment.
• Adds support for importing/switching multiple IPTC Presets. (IPTC = International Press Telecommunications Council)
• Adds support for C2PA format (The license availability date is undecided). (C2PA = Coalition for Content Provenance and Authenticity)
• Adds support for Custom Grid Line. Notes: Availability depends on the country and region. Custom Grid Line is available as a paid license.

FTP transfer & network functions:

• Allows you to upload camera images directly to the Creators’ Cloud app. Notes: Availability depends on the country and region. Creators' App Ver. 2.3.1 or later is necessary. Settings must be adjusted in the Creators' App in advance. 
• You can now automatically schedule FTP transfer of protected movies and still imagesMovies/still images transferred via FTP transfer can now be automatically protected
• You can now transfer specific images with priority during FTP transfer
• Adds support for USB streaming. Note: When connecting to a device with a USB Type-C port, please use a commercially available USB cable or a conversion adapter.
• Adds support for SFTP
• Wireless LAN security now supports WPA3-SAE
• Improves remote shooting and image transfer security when using the Creators' App and Imaging Edge Desktop software. Note: Please update the Imaging Edge Desktop software to the latest version (Ver. 3.7.0 or later).

Others:

• Fixes an issue where the camera may not be able to connect to the network
• Fixes an issue where images may not be transferred properly during FTP transfer
• Fixes an issue where the folder name setting for still images may switch from the set value to the default value (MSDCF) when the battery is removed
• Fixes an issue where the timecode wasn’t always retained after a power restart
• Improves the exposure stability when using extended ISO during movie recordings
• Improves the operational stability of the camera
• ILCE-9M3 System Software (Firmware) Update Ver. 2.00

Sony A9 III firmware update ver. 2.00

KAMERA & BILD TESTAR

fullformat tester test sony a9 iii sony actionfoto

TEST: Sony A9 III – med global slutare & extrem snabbhet

Shooting & playback functions:

• Allows you to turn the camera on/off remotely from a computer using a wired connection to the internet (LAN)Note: Remote Camera Tool Ver. 4.1.00 is required to activate this function.
• Adds a function that automatically creates still images with Shot Marks from movie frames after recordingsNote: You can add a Shot Mark while shooting or playing a movie and use it as a mark for selecting, transferring, or editing the movie.
• Allows the use of shutter speeds up to a maximum of 1/80000 seconds in all drive modes and the NR Shooting setting (long-exposure noise reduction) when the aperture value is F1.8 or higher
• Adds support for the Relay Playback function
• Adds the Sync Release function that releases the shutters of multiple sub-cameras in conjunction with the main camera’s shutter timing. Note: Remote Camera Tool Ver. 4.1.00 is required to activate this function.
• Adds a function that displays the focus frame on the Remote Camera Tool app screen when the monitor and viewfinder are turned off. Note: Remote Camera Tool Ver. 4.1.00 is required to activate this function.
• The maximum number of images that can be recorded in one folder has been increased to 9,999
• Enables display of the Wi-Fi signal strength
• Adds support for C2PA format (The license availability date is undecided). (C2PA = Coalition for Content Provenance and Authenticity)
• Adds support for Custom Grid Line. Note: Custom Grid Line is available as a paid license. Availability depends on the country and region.

FTP transfer & network functions:

• Allows you to upload camera images directly to the Creators’ Cloud appNote: Creators’ App Ver. 2.3.1 or later is necessary. Settings must be made in the Creators’ App in advance. For more information, please visit the Creators’ App support website. Service may not be available in some countries or regions. Please refer to this support page.
• You can now automatically schedule FTP transfer of protected movies and still images
• Movies/still images transferred via FTP transfer can now be automatically protected
• Adds a function to prioritize specific images via FTP transfer
• Adds support for SFTP

Others:

• Fixes an issue where the camera would occasionally become unstable during continuous shooting
• Fixes an issue where the color of a JPEG image may change when cropped in the camera
• Fixes an issue where images may not be transferred properly during FTP transfer
• Fixes an issue where the folder name setting for still images may switch from the set value to the default value (MSDCF) when the battery is removed
• Fixes an issue where the camera may not be able to connect to the network
• Fixes an issue where the timecode wasn’t always retained after a power restart
• Improves the functionality and operational stability of the camera